This set of MCQ(multiple choice questions) focuses on the Introduction To Internet Of Things NPTEL Week 3 Solutions.
Course layout (All week answers link)
Week 0
Week 1: Introduction to IoT
Week 2: Basics of Networking
Week 3: Communication Protocols
Week 4:Â Sensor Networks
Week 5:Â Interoperability in IoT
Week 6: Introduction to Python programming
Week 7:Â Implementation of IoT with Raspberry Pi (contd), Introduction to SDN, SDN for IoT
Week 8:Â SDN for IoT (contd), Data Handling and Analytics, Cloud Computing
Week 9:Â Cloud Computing(contd), Sensor-Cloud
Week 10:Â Fog Computing, Smart Cities and Smart Homes
Week 11: Connected Vehicles, Smart Grid, Industrial IoT
Week 12: Industrial IoT (contd), Case Study: Agriculture, Healthcare, Activity Monitoring
NOTE: You can check your answer immediately by clicking show answer button. Moreover, this set of “Introduction To Internet Of Things NPTEL Week 3 Solution” contains 15 questions.
Now, start attempting the quiz.
Introduction To Internet Of Things NPTEL Week 3 Solutions
Q1. State whether the following statement is true or false.
Statement: Wired HART lacks a network layer.
a) True
b) False
Answer: a) True
Q2. The HART physical layer is derived from ____________ protocol and operates only in __________ GHz ISM band.
a) IEEE 802.15.4, 2.4
b) IEEE 802.15.4, 4.8
c) IEEE 802.16.5, 4.8
d) None of these
Answer: a) IEEE 802.15.4, 2.4
Q3. State whether the following statement is True or False
Statement: Super-frames in HART consist of grouped 20ms wide timeslots.
a) True
b) False
Answer: b) False
Q4. _________________ identifies channels consistently affected by interference and removes them from use.
a) Channel hopping
b) Channel aggregating
c) Channel blacklisting
d) Frequency aggregating
Answer: c) Channel blacklisting
Q5. The _________________ supervises each node in the network and guides them on when and where to send packets.
a) Application manager
b) Network manager
c) Trust manager
d) None of these
Answer: b) Network manager
Q6. NFC is designed for use by devices within _________ to each other?
a) Close proximity
b) No near contact
c) Both a) and b)
d) None of these
Answer: a) Close proximity
Q7. ______________ contain information which is readable by other devices, however it cannot read information itself.
a) Active NFC devices
b) Dumb NFC devices
c) Passive NFC devices
d) None of these
Answer: c) Passive NFC devices
Q8. NFC devices work on the principle of ___________________?
a) Magnetic introduction
b) Magnetic induction
c) Both a) and b)
d) None of these
Answer: b) Magnetic induction
Q9. Which of these is NOT a mode of operation NFC?
a) Server-to-Server
b) Peer-to-Peer
c) Read/Write
d) Card emulation
Answer: a) Server-to-Server
Q10. State whether the following statement is true or false
Statement: Paging in Bluetooth is the process of forming a connection between two Bluetooth devices.
a) True
b) False
Answer: a) True
Q11. There are ______ modes of operation in Bluetooth.
a) 3
b) 4
c) 5
d) None of these
Answer: b) 4
Q12. Zwave uses __________ for signaling and control?
a) Light
b) RF
c) Sound
d) None of these
Answer: b) RF
Q13. Which of the following is/are not a constraint on sensor nodes?
a) Must consume high power
b) Not be adaptive to the environment
c) Both a) and b)
d) None of these
Answer: c) Both a) and b)
Q14. ___________ are simply those that are unable to perform an operation; this could be because of power failure and environmental events.
a) Normal nodes
b) Failed nodes
c) Badly failed nodes
d) None of these
Answer: b) Failed nodes
Q15. Dumb behavior of sensor nodes is _______________ in nature (as it is dependent on the effects of the environmental conditions).
a) Temporal
b) Spatial
c) Both a) and b)
d) None of these
Answer: a) Temporal
Introduction To Internet Of Things NPTEL Week 3 Solutions
Q1. Choose the correct option based on the following two statements on the HART Physical Layer.
Statement I: It is derived from the IEEE 802.15.4 protocol.
Statement II: It operated only in the 2.4 GHz ISM band.
a) Statement-I True and Statement-II False
b) Statement-I False and Statement-II True
c) Both Statements I and II are False
d) Both Statements I and II are True
Answer: d) Both Statements I and II are True
Q2. Which of the following characteristics of HART Data Link Layer helps to increase reliability and security?
a) Channel Hopping and Channel Blacklisting
b) Channel Crunching and Jamming
c) Scattering
d) All of these
Answer: a) Channel Hopping and Channel Blacklisting
Q3. State True or False
Statement: Channel blacklisting in HART identifies channels consistently affected by interference and removes them from use.
a) True
b) False
Answer: a) True
Q4. At the MAC layer –
Statement-I: WirelessHART utilizes Time Division Multiple Access (TDMA)
Statement-II: ZigBee applies Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
a) Statement-I True and Statement-II False
b) Statement-I False and Statement-II True
c) Both Statements I and II are False
d) Both Statements I and II are True
Answer: d) Both Statements I and II are True
Q5. NFC works on the principal of
a) Pressure
b) Magnetic Induction
c) Both a) and b)
d) None of these
Answer: b) Magnetic Induction
Q6. Bluetooth technology is based on Ad-hoc technology also known as?
a) Ad-hoc Piconets
b) Ad-hoc Micronets
c) Ad-hoc Nanonets
d) None of these
Answer: a) Ad-hoc Piconets
Q7. Class 2 Bluetooth radios have a range of about?
a) 1 m
b) 2 m – 5 m
c) 10 m
d) None of these
Answer: c) 10 m
Q8. Which of the following is NOT a phase in Bluetooth connection establishment?
a) Inquiry
b) Booking
c) Paging
d) Connection
Answer: b) Booking
Q9. Zwave can support ___________ number of nodes in a network?
a) 232
b) 233
c) 234
d) 235
Answer: a) 232
Q10. Topologies allowed in ISA 100.11A are?
a) Ring only
b) Mesh and Hybrid
c) Mesh and Ring
d) Mesh and Star/Tree
Answer: d) Mesh and Star/Tree
Q11. An example of an Operating System (OS) that a sensor node can have is?
a) MicronOS
b) TinyOS
c) Both a) and b)
d) None of these
Answer: b) TinyOS
Q12. Which of the following is NOT a constraint on sensor nodes?
a) Must consume extremely low power
b) Be non-autonomous
c) Be adaptive to environment
d) None of these
Answer: b) Be non-autonomous
Q13. Nodes in WSNs that exhibit features of failed nodes but they can also send false routing messages which are a threat to the integrity of the network are called?
a) Normal Nodes
b) Badly Failed Nodes
c) Failed Nodes
d) Selfish Nodes
Answer: b) Badly Failed Nodes
Q14. Which of the following are the two popular schemes to re-establish the connectivity between dumb nodes with others?
a) CoARD and CoRD
b) CoRAD and CoARD
c) CoRD and CoRAD
d) None of these
Answer: c) CoRD and CoRAD
Q15. Full form of WBAN is?
a) Wireless Body Area Network
b) Wirelessed Body Area Network
c) Wireless Bodily Area Network
d) None of these
Answer: a) Wireless Body Area Network
Previous Year – Introduction To Internet Of Things NPTEL Week 3 Solutions
Q1. Which of the following handles packets, paging and inquiry in Bluetooth?
a) L2CAP
b) Baseband
c) RFComm
d) Physical Radio
Answer: b) Baseband
Q2. Which of the following incorporates channel hopping after every packet transmission?
a) Zigbee
b) WirelessHART
c) 6LoWPAN
d) None of these
Answer: b) WirelessHART
Q3. In “X” protocol, a central network controller device set-up a network with 1 Network ID and multiple node IDs for the devices in it. The nodes with different Network IDs cannot communicate with each other. What is “X”?
a) Z-wave
b) Zigbee
c) Bluetooth
d) ISA 100.11A
Answer: a) Z-wave
Q4. In the context of Sensor Web, SensorML stands for ________.
a) Sensor Modeling language
b) Sensor Machine language
c) Sensor Markup language
d) None of the above
Answer: a) Sensor Modeling language
Q5. Which of the following protocol is best suited to provide interference-free communication while minimizing latency and ensuring quality of service?
a) WirelessHART
b) ISA100.11A
c) Both WirelessHART and ISA100.11A
d) None of these
Answer: b) ISA100.11A
Q6. Which of the following solution approach is used to overcome the limitation of ineffective wakeup and sensing under rare event monitoring scenario in social sensing?
a) Duty-cycle management
b) Sleep-cycle management
c) Packet transmission management
d) Both duty-cycle and sleep-cycle management
Answer: a) Duty-cycle management
Q7. Which of the following technique Bluetooth master uses to avoid collisions during transmission in a Piconet?
a) Frequency Division Multiplexing
b) Frequency Hopping Spread Spectrum
c) Time Division Multiplexing
d) Direct Sequence Spread Spectrum
Answer: c) Time Division Multiplexing
Q8. Which of the following limitation is faced by total co-operation in Wireless Ad Hoc and Sensor Networks?
a) Decreasing network throughput
b) Decreasing energy
c) Both (a) and (b)
d) No limitation exists
Answer: b) Decreasing energy
Q9. Which of the following can function over a reliable packet transfer protocol?
a) L2CAP
b) Service Discovery Protocol
c) RFComm
d) Physical Radio
Answer: b) Service Discovery Protocol
Q10. In which of the following mode, NFC devices can act as both readers as well as tags?
a) Reader/writer
b) P2P
c) Emulation
d) NFC devices can’t act as both readers as well as tags
Answer: c) Emulation
Q11. In WSN, Information theoretic self-management (INTSEM) controls the transmission rate of a node by adjusting a node’s ______________.
a) Duty cycle
b) Lifetime
c) Sleep time
d) Can’t control the transmission rate
Answer: c) Sleep time
Q12. Which of the following layer of ISA 100.11A supports mesh routing?
a) Network layer
b) Data link layer
c) Transport layer
d) MAC layer
Answer: b) Data link layer
Q13. Which of the following is used to avoid interference-prone channels in HART?
a) Channel blacklisting
b) Channel switching
c) Channel hopping
d) Super-frames
Answer: b) Channel switching
Q14. When the devices are not in range, messages are routed through different nodes to bypass obstructions created by household appliances or layouts. Which of the following exhibit such characteristic of avoiding radio dead-spots?
a) Bluetooth
b) 6LoWPAN
c) Z-wave
d) Zigbee
Answer: c) Z-wave
Q15. Which of the following is TRUE in terms of power (in mW) and range (in m) of the classes of Bluetooth devices?
a) Class-1: Power=100mW, Range=100m
b) Class-2: Power=2.5 mW, Range=100m
c) Class-1: Power=2.5 mW, Range=100m
d) Class-2: Power=100mW, Range=100m
Answer: a) Class-1: Power=100mW, Range=100m
<< Pre- Introduction To Internet Of Things Week 2 solutions
>> Next- Introduction To Internet Of Things Week 4 Solutions
DISCLAIMER: Use these answers only for the reference purpose. Quizermania doesn't claim these answers to be 100% correct. So, make sure you submit your assignments on the basis of your knowledge.
NPTEL answers: Programming in Modern C++
Social Networks nptel assignment answers
NPTEL answers: Problem solving through programming in C
NPTEL – Python for Data Science assignment solutions
For discussion about any question, join the below comment section. And get the solution of your query. Also, try to share your thoughts about the topics covered in this particular quiz.